AU
sharkclean .com . au
NZ
sharkclean .com . nz
6
AU
02 8 8 01 76 6 6
NZ
0 8 0 0 112 6 60
Assembling Your Steam Pocket
®
Mop
WARNING: ALWAYS make sure the Steam Mop
is UNPLUGGED when not in use. NEVER fill
the Steam Mop or attach the mop head when
the Steam Mop is plugged into an electrical
outlet. Unplug from the electrical outlet and
allow to cool before you fill the Steam Mop,
or attach or remove the head. To prolong the
life of your Steam Mop, we recommend using
distilled water. Make sure you add only water
to the tank. Chemicals or cleaning solutions
(including vinegar) may damage the Steam Mop
and could be unsafe for you and your family.
STEAM MOP ASSEMBLY
1
Insert the Steam Mop handle into the Steam Mop
body.
Push the handle in until it clicks into place.
(fig. 1)
2
Slide the Klik n' Flip
®
Mop Head into the Steam Mop
body. Push until it clicks securely into place.
(fig. 1)
To detach the mop head, press the release button
and slide off.
3
To attach the Dirt Grip
™
pad, spread the pad on
the floor with the pocket side up. Centre the Klik n'
Flip Mop Head above the pad, then press the pad
release button on the back of the Steam Mop body.
(fig. 2a)
Both sides of the mop head will drop open.
(fig. 2b)
Slip the mop head’s four corner tabs into
the four corner pockets of the pad.
(fig. 3 and fig.
4)
Gently press one side of the mop head to the floor
until that side clicks into place.
(fig. 5)
Repeat on
the other side.
(fig. 6)
4
Pull down on the water tank lid to open.
(fig. 7)
5
Use the filling flask to pour water into the tank.
(fig. 8)
Water can be poured into the tank directly.
DO NOT
overfill past the water line on the fill flask.
Press the water tank lid firmly to close it.
fig. 1
fig. 3
fig. 2b
fig. 2a
fig. 5
fig. 6
fig. 4
fig. 7
fig. 8
