AU
sharkclean .com . au
NZ
sharkclean .com . nz
2
AU
02 8 8 01 76 6 6
NZ
0 8 0 0 112 6 60
12.
DO NOT
pull or carry by cord, use cord as
a handle, close a door on cord, or pull cord
around sharp edges or corners.
DO NOT
run
Steam Mop over cord. Keep cord away from
heated surfaces.
13.
DO NOT
unplug by pulling on power cord. To
unplug, grasp the plug not the power cord.
DO NOT
use extension cords or outlets with
inadequate current-carrying capacity.
14.
DO NOT
put any objects into the steam nozzle
openings. Discontinue use if the steam nozzle is
blocked.
15.
DO NOT
put hands or feet under the Steam
Mop. It gets very hot.
16. Use
ONLY
on flat, horizontal surfaces.
DO NOT
use on walls, counters, or windows.
17.
DO NOT
use on leather, wax-polished furniture,
synthetic fabrics, velvet, or other delicate,
steam-sensitive materials.
18.
DO NOT
add cleaning solutions, scented
perfumes, oils, or any other chemicals to the
water used in the Steam Mop as this may
damage it or make it unsafe for use. If you live
in a hard-water area, we recommend using
distilled water in your Steam Mop.
19.
NEVER
leave any Dirt Grip
™
pad in one spot
while using or storing for any period of time, as
this may damage your surfaces.
20. The liquid or steam must not be directed
towards equipment containing electrical
components, such as the interior of ovens.
21. You can release the Dirt Grip pad after you have
unplugged the Steam Mop and allowed it to
cool.
22. When cleaning the exterior of the Steam Mop,
unplug the power cord from the electrical outlet
and clean the Steam Mop with a dry or damp
cloth.
DO NOT
pour water or use alcohol,
benzene, or paint thinner on the Steam Mop.
23. Extreme caution should be exercised when
using the Steam Mop to clean stairs.
24.
NEVER
use Steam Mop without the Dirt Grip
pad attached.
25. Keep your work area well lit.
26. Store Steam Mop indoors in a cool, dry place.
27. To avoid circuit overload,
DO NOT
operate
another appliance on the same socket (circuit)
as the Steam Mop.
28. To avoid scalding injuries,
ALWAYS
unplug and
allow the Steam Mop to cool before removing
or changing mop heads, accessories, or Dirt
Grip pads.
WARNING:
Your Steam Mop is
designed to clean hard-floor surfaces
that will withstand high heat. DO NOT use
on unsealed wood or unglazed ceramic
floors. On surfaces that have been treated
with wax and on some no-wax floors, the
sheen may be removed by the heat and
steam action. It is ALWAYS recommended
to test an isolated area of the surface
to be cleaned before proceeding. We
also recommend that you check the
use and care instructions from the floor
manufacturer.
SAVE THESE INSTRUCTIONS
