11
1-800-798-7398
SETTING UP YOUR SHARK ION ROBOT™
INSTALLING THE SIDE BRUSHES
1
Turn the unit over.
2
Align hole in center of side brush over brush post on
bottom of unit.
3
Press side brush down over the post until it snaps
into place.
NOTE:
Some carpets
may cause the robot to
malfunction due to pile
height.
IMPORTANT:
Before
cleaning an entire room
for the first time, we
recommend that you
first test your unit on a
small section of the floor
to ensure there is no
scratching.
IMPORTANT:
Shark ION
ROBOT uses cliff sensors
to avoid stairs and other
steep drops. Sensors may
work less effectively when
they are dirty. For best
results, clean sensors as
needed.
TIP:
Turn off the power
switch if Shark ION ROBOT
will not be used for a long
period of time.
TIP:
To preserve battery
life, unit should be
recharged at least once
every three months.
CLICK
CLICK
