AIR INFO SETTINGS
The built-in sensor detects your air quality to give you real-time information. Use the
MAX
button to switch between air quality display
options.
INFO
TOP CONTROL
PANEL
FRONT DISPLAY
SCREEN
REAL-TIME READING
% CLEAN AIR
MAX
Displays the air quality rating:
• Poor (Red): 0%–69% • Fair (Yellow): 70%–84% • Good (Blue): 85%–100%
If your unit reads 100% this means your air quality is very good.
Should the air quality drop, the % will adjust accordingly.
TIME TO CLEAN AIR
MIN
MAX
Shows the estimated time remaining until your air is clean.
PARTICLE SIZES
The PM (particulate matter) value is the amount of particulate in your air, measured in micrograms
(
μ
g) per cubic metre. Your air purifier measures two particles sizes, PM2.5, and PM10.
PM2.5
MAX
MAX
Amount of PM2.5-sized particles in your air,
including smoke and bacteria.
PM10
MAX
MAX
Amount of PM10-sized particles in your air,
including dust, pollen, and mould.
UNDERSTANDING YOUR AIR QUALITY
The ring on the front and top displays will change colour as your air quality changes, allowing you to easily monitor your air quality even
when you are far from the unit.
GOOD
85–100
%
A blue ring means your air quality
is good, with a low level of particle
concentration.
FAIR
70–84
%
An amber ring means your air quality
is fair, with a moderate level of particle
concentration. For quicker results,
increase fan speed or select Auto Mode.
POOR
0–69
%
A red ring means your air quality
is poor, with a high level of particle
concentration. For quicker results,
increase fan speed or select Auto Mode.
Note:
Air quality sensor uses a cumulative particle count across all particle sizes to determine air quality percentage.
OPTIMISING FAN SPEED
Your air purifier is equipped with 4 fan speed settings. Adjust fan speed to optimise your cleaning performance.
DISPLAY
SPEED
BEST FOR
1
Quiet Operation
2
Reducing Odours
3
Reducing Allergens
4
Maximum Cleaning
