1
5
6
2
4
3
CONTROL PANEL
Your Air Purifier is equipped with digital displays on both the top and front of the unit.
TOP CONTROL PANEL
Displays the current air quality status based on the air info
MAX
option selected, and includes controls that allow you to customise
the settings.
MAX
FRONT DISPLAY SCREEN
Displays the current air quality status based on the air info mode
selected on the top control panel.
TOP CONTROL PANEL BUTTONS
MAX
On/Off:
Press to turn the power on or off.
MAX
Air Info:
Press to switch between air quality display options. See the
Air Info Settings section for more information.
MAX
Auto Mode:
Automatically adjusts fan speed based on air quality.
If air quality decreases, fan speed will increase. When air quality is
100% fans will go into power-saving standby mode.
Leave your unit in Auto
Mode for optimal filter life and performance.
MAX
Filter Life:
Press to show the remaining filter life in hours. Once
the filter has 0 hours remaining, the filter life
MAX
button will flash
to indicate the filter needs to be changed. See Installing and Removing the
Filter section for more information.
MAX
Brightness:
Adjusts the brightness of both the front display
screen and the top control panel. Switch between 3 options: full
brightness, partially dim, fully dim.
MAX
Shut-Off
Timer:
Set the number of hours for the air purifier to run
before it automatically shuts off. Timer can be set between 1–12
hours.
MAX
Fan Speed:
Adjusts the speed of the fan. Select one of 4 settings: 1
Low, 2 Medium, 3 High, 4 Maximum. Note: If fan speed is manually
changed, auto mode will be deactivated. For tips on optimal fan setting, see
Optimising Fan Speed section.
REMOTE CONTROL
Your air purifier includes a remote control that can turn the power on or off, and adjust the settings.
USING THE REMOTE CONTROL
To use the remote control, aim it at the front display screen and press the
buttons on the remote. The remote control has a range of 5 metres.
For best results, make sure no obstacles are between the remote control
and the display screen.
REMOTE CONTROL BATTERY
This remote uses AAA batteries. To replace the battery, follow the
steps below.
1.
With a Phillips-head screwdriver (not included) unscrew the battery tray
on the back of the remote.
2.
Slide out the battery tray.
3.
Remove the old battery and dispose of it according to local regulations.
Take additional caution to keep old battery out of reach of children.
4.
Insert the new battery, making sure the polarities (+) (–) are oriented
correctly.
5.
Reinsert the battery tray and use the screw to completely secure it
in place.
REMOTE CONTROL BUTTONS
1.
MAX
Turns the unit on/off.
2.
MAX
Switch between air quality display options.
3.
MAX
Enables Auto Mode.
4.
MAX
Adjusts brightness.
5.
MAX
Adjusts fan speed.
6.
MAX
Sets timer.
