85
Please highlight icon
to select the corresponding function.
Figure 5-49
For the HDD group setup operation, please note:
E
ach channel’s records can be stored into the specified HDD Group.
Each HDD Group is corresponding to several hard disks, while one hard disk is only included in
one HDD Group.
Each channel is only corresponding with one HDD Group, while one HDD Group can s tore
records from several channels.
HDD Group is only available for read-write HDD and self-defined disks, other types of hard
disks cannot be set as HDD Group.
HDD Setting
Click the button “HDD Settings” at the top right corner of the
Figure 5-48, system will pop up an interface
as below. See Figure 5-50.
HDD: Here you can view the HDD amount the device can support. If there is a mark
in the
front of the number, it means current position has installed a HDD.
HDD Group: It lists the HDD Group number of current hard disk.
When you are setting the HDD Group, please check the box of the hard disk, and then choose the
corresponding HDD Group number and save the settings.
Please note, one HDD is corresponding to one group, while one group can have many HDDs. The HDD
group No. is corresponding HDD port, the HDD group No. may vary if you change the HDD.
In Figure 5-50, you can see the system has two working hard disks at the first and second position, and
the first hard disk belongs to HDD Group 1, the second hard disk belongs to HDD Group 2.
Important
Once you change the HDD Group settings, system will reboot!
