135
Parameter
Function
PTZ
Activation
Here you can set PTZ movement when alarm occurs. Such as go
to preset X. See Figure 7-50.
7.8.3.1.2 Video Loss
The video loss interface is shown as in Figure 7-51.
After analysis video, system can generate a video loss alarm when the detected moving signal reached
the sensitivity you set here.
Please note video loss does not support anti-dither, sensitivity, region setup. For rest setups, please
refer to chapter 7.8.3.1.1 motion detect for detailed information.
Figure 7-51
7.8.3.1.3 Camera Masking
The camera masking interface is shown as in Figure 7-52.
After analysis video, system can generate a camera masking alarm when the detected moving signal
reached the sensitivity you set here.
For detailed setups, please refer to chapter 7.8.3.1.1 motion detect for detailed information.
Figure 7-52
