SHANY SCVR-8308ST-1, User Manual

Page: 111 / 183

103
6.2.6 Activate Pattern Function
In Figure 6-6
X
input mode value in the No. blank, and click pattern button.
6.2.7 Border Setup
In Figure 6-5
X
, click border button. The interface is shown as in Figure 6-10
X
.
Please go to Figure 6-2
X
, use direction arrows to select camera left limit, and then please go to Figure
6-10
X
and click left limit button
Repeat the above procedures to set right limit.
Figure 6-10
6.2.8 Activate Border Function
In Figure 6-6
X
, click auto scan button, the system begins auto scan. Correspondingly, the auto scan
button changes to stop button.
Click stop button to terminate scan operation.
6.3 Flip
In Figure 6-6
X
, click page switch button, you can see an interface is shown as below. See Figure 6-11
X
.
Here you can set auxiliary function.
Click page switch button again, system goes back to Figure 6-2
X
.
Figure 6-11