High-Flying
Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 43 -
AT+ RELD<CR>
+ok=rebooting…<CR>< LF ><CR>< LF >
When operate this command, module will restore to factory default setting and reboot.
4.2.2.8. AT+FCLR
Function: Erase factory setting;
Format:
Query Operation
AT+FCLR<CR>
+ok=<status><CR>< LF ><CR>< LF >
4.2.2.9. AT+Z
Function: Re-start module;
Format:
AT+ Z<CR>
4.2.2.10. AT+H
Function: Help;
Format:
Query Operation
AT+H<CR>
+ok=<command help><CR>< LF ><CR>< LF >
Parameters:
command help: command introduction;
4.2.2.11. AT+CFGRD
Function: Batch Read User Configure Parameters;
Format:
Query Operation
AT+CFGRD<CR>
+ok=<config><CR>< LF ><CR>< LF >
Parameters:
config: the first two bytes means the length of configuration parameters;
4.2.2.12. AT+CFGWR
Function: Batch Write User Configure Parameters;
Format:
Set Operation
AT+CFGWR=<config><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
config: the first two bytes means the length of configuration parameters;
HF-SH01
