High-Flying
Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 33 -
User can access
http://10.10.100.254
to set again, and user name and password is “admin”. HF-
LPB100 will restore to AP mode for factory default setting.
Figure 22. Restore Page
3.2. HF-LPB100 Usage Introduction
3.2.1. Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPB100 module.
(User can also select other tools used to debug serial port).
Serial Debugging Software: ComTools
Ethernet Debugging Software: TCPUDPDbg
3.2.2. Network Connection
User can select two methods to connect HF-LPB100 module base on dedicated application.
Use HF-LPB100 STA interface.
HF-LPB100 and debug PC2 connect to a wireless AP,
another PC1 (or user device) connect to HF-LPB100 module with serial port:
Figure 23. STA Interface Debug Connection
Use HF-LPB100 AP interface.
Debug PC2 connect to HF-LPB100 through wireless
connection, another PC1 (or user device) connect to HF-LPB100 module with serial port.
HF-SH01
