Shadin Avionics 943200-11, Installation Manual

Page: 15 / 17

DOCUMENT
943200-11 ETM RECORDER
Control SC1
INSTALLATION MANUAL
Revision
–
M943200-11 Page: 15 of 17
SHADIN AVIONICS
www.shadin.com Customer Service: (952) 836-2269 service@shadin.com
7 TROUBLESHOOTING
This section provides some methods for troubles shooting the ETM Recorder.
IF NO FILES ARE ON THE USB FLASH DRIVE
A. Verify the USB Flash drive was not left in the ETM Recorder during a flight.
1. If the USB Flash drive is present at power up the ETM Recorder goes into USB Data
Download mode and will not record the ETM data.
2. DO NOT LEAVE THE USB FLASH DRIVE IN THE ETM RECORDER DURING FLIGHT.
B. Verify the USB Flash drive is inserted prior to applying power.
1. Only at power up will the ETM Recorder recognize the USB Flash drive.
2. Power cycle the ETM Recorder
C. Verify the USB Flash drive is formatted to FAT32.
1. This can be done by connecting the USB Flash drive to a Windows PC, click on the start
menu and click on Computer.
2. Click on the USB Flash drive to highlight, right click and click on Properties.
3. Look for the File system type, it should be formatted to FAT32.
4. If the File System type is not FAT32, click Cancel, right click on the USB Flash drive and click
Format…
5. Select File System type FAT32 and click Start.
6. A warning will pop up to confirm that you want to reformat the USB Flash drive, this will erase
all the existing data on the USB Flash drive so only click OK if existing files on the USB Flash
drive are not needed.
7. Once complete click OK and the USB Flash drive is ready to use.