background image

PAGE 5

PAGE 4

TRAINING: 

Prior to use, all users must become familiar with the 

instructions given in this manual. In particular, become familiar with 
the ON/OFF control for stopping the compressor in the event of an 
emergency.

The equipment is to be used only for its prescribed purpose. Any 
other use is deemed to be a case of misuse. The user / operator and 
not the manufacturer will be liable for any damage or injuries of any 
kind caused as a result of this.

NEVER TOUCH MOVING PARTS: 

Never place your hand near any 

moving parts on the air compressor or operate with the covers 
removed.

PROTECT YOURSELF AGAINST ELECTRIC SHOCK: 

Never operate 

the air compressor in wet or damp locations.

DRESS PROPERLY: 

Loose clothing or jewellery may be caught in 

moving parts. Always tie long hair back, and wear suitable clothing.

KEEP VISITORS/CHILDREN AWAY:

 Do not allow visitors/children to 

handle the air compressor or attachments and ensure that any people 
in the work area are suitably dressed.

KEEP THE WORK AREA CLEAN: 

Cluttered areas mean accidents, so 

clear the work area of all unnecessary tools, debris and furniture.

    SAFETY PRECAUTIONS

Take environmental influences into account: 

- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet environment. There is a
risk of electric shock!
– Make sure that the work area is well-illuminated.
– Do not use electric tools where there is a risk of fire or explosion.

DO NOT TOUCH HOT SURFACES: 

During operation, the motor, 

connections, compressor body, cylinder head and tubes may get 
hot, do not touch. 

DO NOT DIRECT AN AIR STREAM AT THE BODY:

 Do not direct 

the air stream at people or animals, as injury may result. Com-
pressed air can cause soft tissue damage and propel dirt and other 
particles at high speed. 

BREATHING AIR: 

This compressor should not be used to supply 

breathing quality air. Never use it as breathing apparatus. 

STAY ALERT: 

Watch what you are doing, use common sense, and 

do not operate the air compressor when you are tired. The air  
compressor should not be used if you are under the influence of 
alcohol, drugs or any medication that makes you drowsy.

SAFETY PRECAUTIONS

WWW.SGS-ENGINEERING.COM

Summary of Contents for SC50VT










Reviews: