SGS PO 5050 DE, User Manual

Page: 18 / 27

USING THE DEVICE
APPLICATION LIFE:
When used under recommended conditions, the device has a lifetime of 10 years .
Before using the appliance for the first time, the outer surface should be soaked in warm
soapy water and cleaned with a squeezed cloth.
Open the on / off switch
Set the thermostat (250 ° C - 300 ° C). (The green light will light up).
When you start the product for the first time, a smell may originate from the insulating
material and the heating elements. For this reason, set all thermostats to 250 ° C and start
the product for 45 minutes before starting use.
After the green light goes out, place the pizzas to be cooked
Pizza cooking time is about 7-8 min. At about 280 ° C.
With the key, you can check whether the pizzas are cooked by lighting the lamp.
Once the pizzas are shaved open the lid and take the pizzas. Close the cover again.
Do not cut off the electric power of the oven if you want to save money during short waiting
periods while using it, and wait until the thermostat is at 90 ° C (if the oven electricity is cut
off, it will cause time and energy loss due to being hot enough for the next cooking
process).
Switch off the on / off switch after daily use. Clean the appliance after the power is cut off.
It is recommended to operate the device at temperatures b 5 ° C and + 40 ° C
and at maximum humidity conditions of 65%.
18