16
Control Microcomputer
GiottoSpot 400 rel.1.01
3.0 “Control” Microcomputer
Giotto Spot is equipped with a microcomputer which allows to customize the fixture to suite the type of installation. In fact, it's possible to assign
the start address; obtain information regarding lamp life and fixture operation time; run test programs to check correct fixture operation and
customize some parameters.
3.1 Navigating in the menu
When it's switched on, the fixture runs a start-up reset procedure and the display indicates if there's an input signal or not.
The 3 keys under the display are for selecting and using the various submenus which make up the main menu.
- UP/DOWN keys: used to scroll the various items in the menu. In the selected menu, used to change the required parameters.
- ENTER key: used to access to the selected menu and, once the necessary changes have been made, is used to confirm them.
up
up
enter
enter
down
down
Accel
up
up
enter
enter
down
down
Accel
up
up
enter
enter
down
down
Addr=100