4
Giotto Spot 400 CMY rel.1.00
Main features
Lamp
Giotto Spots use a Philips MSD 400HR (6000°K) discharge lamp.
Effects
- Linear zoom (9° - 22°)
- Fast linear iris
- Automatic electronic focus
- Linear dimmer ( 0-100% )
- Shutter / strobe 12 fps with music sync
- 2 gobo wheel
- 1 Colour wheel with 6 pos white, supplied as standard with 8 dichroic colours
- Advanced CMY colour mixing.
- Animation wheel.
- Variable speed gobo scrolling
- Gobo shake
- Rainbow effect on gobo wheel.
- Color change and gobo change with blackout
- Color change and gobo change with music sync
- 2-tone beam, analog color selection, 16-speed rainbow
- 1 4-facet rotating prism with adjustable speed in both directions
- Linear variable frost filter: from soft-edge to full-wash
- Linear CTO filter
- Automatic re-positioning with black-out
- Macros
Movement
- 540° Pan (2.8sec.) and 240° Tilt (1.7sec.)
- 8/16 bit movement resolution
- Automatic re-positioning in the event of accidental head movement
- Possibility of inverting Pan and Tilt movement
- Possibility of limiting Pan and Tilt range
- Variable acceleration and speed parameters
Electronic Ballast
Supplied as standard with every fixture
- Automatic universal power supply acceptance: 90-245V 50,60Hz
- Flicker-free
- Lamp power reduction in the event of fixture overheating
- Power Factor Correction
- Automatic energy saving in the event of beam black-out
- Hot re-strike.
Optics
- High luminous efficiency Optics
- Linear beam projection angle variation (9° - 22°)
- Motorized focus
Display/Microcomputer
- The fixture can be "customized" according to type of installation: function tests available for each effect; Lamp On/Off via DMX
can be enabled; Fixture reset via DMX can be enabled; fixture addressing; display "flip" function (rotates through 180°); adjusta-
ble display brightness and more.
- Info displayed includes: lamp elapsed time and strike counters, fixture operating time counter, software version supported.
Control signal
Input signal DMX 512 - RS 232
Mounting System
- "Fast-Lock" clamps supplied as standard with fixture
- Several clamp mounting points to enable the fixture to be mounted on any type of truss
- Safety chain/cable mounting points
