8
Installation
Giotto Spot 400 CMY rel.1.00
1.2 Access to internal components
Giotto fixtures have a simple head opening mechanism.
All work must ALWAYS be carried out by qualified technical personnel.
ATTENTION: make certain that the fixture is switched off and that there is no risk of burns due to high component tempe-
rature (wait at least 30 minutes after switching off)
To access internal components, proceed as follows:
1. Loosen the two screws shown in Fig.1, Fig. 2 on both sides of the fixture
2. Remove the cover in the direction indicated by the arrow (Fig. 3)
Fig. 1
Fig. 2
3. Unscrew the two threaded pins (1)(2) as shown in Fig.4
4. Swivel the whole block downwards (Fig. 5)
Fig. 3
Fig. 4
Fig. 5
