21
Display panel operations
The display panel can be used to configure individual fixture settings, check the fixture’s wireless status, firmware
version and error messages. When the fixture is powered on, it boots and resets, before displaying the DMX start address.
Using the display panel
•
Press the ‘ENTER’ button to enter a menu or make a selection.
•
Press the arrow buttons to scroll up and down the menus.
•
Press the ‘ESC’ button to take a step back.
•
Press the ‘UP’ and ‘DOWN’ arrows simultaneously to flip the display upside-down.
•
To turn off the P-1, press and hold the ‘ESC’ button until the fixture turns off or go to MENU
→
POWER OFF.
•
To turn on the P-1, press any button and the fixture will power on.
Shortcuts
ESC + ENTER: “Press ‘ENTER’ to confirm factory defaults”
ESC + DOWN: “Press ‘ENTER’ to unpair CRMX”
ESC + UP: “Press ‘ENTER’ to start LED test”
101
(113)
DMX
ESC
ENTER
Summary of Contents for 80031501
