manualshive.com logo in svg

SGC Smartuner SG-230, Installation And Operation Manual, Page: 81 / 90

Share
Download
SGC Smartuner SG-230 Installation And Operation Manual Download Page 81

I

t makes no difference where you 

go or what vehicle you drive, the 

QMS-7 will provide exceptional 

auto-tuning with any HF and VHF 

transceiver.  

QMS-7

Antenna Coupler System

Q

u i c k  

M

o u n t

S

y s t e m

for mobile HF and VHF use

• QMS-7 offers  unsurpassed 

frequency agility without      
user intervention 

• SG-231 Smartuner 

automatic antenna  coupler, 
SG-307 extended full-range 
antenna, and weather 
resistant QMS-7 package

• 1 to 60 MHz   —continuous—

instant tuning while you 
drive

• Rated for use on moving 

vehicles at up to 75 miles 
(120km) per hour

SGC, Inc., P.O. Box 3526 , Bellevue, WA  98009 USA

Tel: 425-746-6310 or 1-800-259-7331  Fax: 425-746-6384   

E-mail— [email protected]  Web site— http://www.sgcworld.com

©
Copyright June, 1997 SGC, Inc.

SGC reserves the right to modify specifications without notice.

®

No Compromise Communications

Summary of Contents for Smartuner SG-230



























































































Reviews:

No comments