4.
When connecting the coupler to the radio/transceiver, a passageway
for the control cable (consisting of an RG-58 coax cable, control wire,
power, and ground, plus the optional tuned indicator wire) will need to be
provided.
Note: By removing the four screws for the ratchet mount base of the SG-303
antenna, the mount can be installed or reinstalled to provide the user with
the set-up most suitable for the application. Insure the screws are tightly
secured after reinstallation.
5.
Once a location for the QMS has been selected, mounting becomes a
simple task. The QMS enclosure mounts in virtually any attitude and the
straps can be moved to either side of the enclosure to accommodate the vehi-
cle (see Figures A-1, A-2, and A-3 for typical installations).
F
Fiig
gu
urre
e A
A--2
2Ñ
ÑS
Siid
de
e v
viie
ew
w o
off Q
QM
MS
S iin
nsstta
alllla
attiio
on
n o
on
n tth
he
e ssiid
de
e o
off a
a ssm
ma
allll v
va
an
n
A-3
© 1998 SGC Inc
Appendix - QMS System
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA 98005 USA
P.O. Box 3526, 98009 Fax: 425-746-6384 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: [email protected] Web site: http://www.sgcworld.com
MOUNTED
WITH FOUR
LARGE
SUCTION
CUPS
SG-303
ANTENNA
STRAP AND
TENSION
BUCKLES
SIDE
DETAIL
COUPLER INSTALLED
INSIDE THE QMS
ENCLOSURE
QMS ANTENNA
SYSTEM MOUNTING
SGC
Antenna