SGC Smartuner SG-211, Operating Manual

Page: 35 / 50

SG-211 User’s Manual
© 2004 SGC Inc. Page 33
ATTENTION: Some retuning may take place as the impedance of the
light bulb varies with the power level. If the power level is held constant
with a continuous carrier such as produced by CW mode operation, the
coupler setting will settle after a short period of time.
RADIO TEST PROCEDURE
1. Connect the transceiver light bulb load to
the radio RF in/out jack.
2. Turn on the radio and set the CW mode.
3. Key the PTT switch on the microphone and
look at the light bulb. If the light bulb load is
connected and the radio is transmitting, the
light should turn on.
4. Set the radio to SSB mode.