DSPro StageGrid 1000 / User Guide
6
Getting Started
Configure SoundGrid and assign your devices as follows, however large or small your system.
Connect the hardware
Install the software
Configure your system
Connect the Hardware
One I/O
In this example, one DSPro StageGrid 1000 is connected directly to the SoundGrid host computer using a Cat 5e
Ethernet cable or better. This provides plugin processing and/or DAW playback/recording via the SoundGrid ASIO/Core
Audio driver.
SoundGrid Host computer
SoundGrid I/O device
The host computer’s LAN port that’s connected to the SoundGrid network should be used for SoundGrid only. Do not
share this port with the internet or other networks.
In this configuration, all plugin processing is carried out on the host computer. The speed and power of the host
defines overall latency.
