SG Models MASTER Edition ZERO KIT, Assembly Manual

Page: 26 / 83

ZERO KIT
26
Instruction Manual.
34.
35.
36.
INSTALLING THE FUSELAGE SERVOS
Because the size of servos difer, you may
need to adjust the size of the precut opening in
the mount. he notch in the sides of the mount
allow the servo lead to pass through.
- Secure the servos with the screws provided with
your radio system.
- Install the rubber grommets and brass collets
onto the throttle servo. Test it the servo into the
aileron servo mount.
THROTTLE SERVO ARM
INSTALLATION
- Install adjustable servo connector in the servo
arm as same as picture below:
2 .
1 .
Minimum servo spec.
Torque : 80 oz-in (5.8 kg-cm) @ 4.8V; 100 oz-
in (7.2 kg-cm) @ 6.0V
- Use White Glue to keep ixed for wing tube.
- Drill to hole for antenna.
- Using Sandpaper Block to sanding around fuse-
lage. Building the fuselage was inished.