SG Models MASTER Edition ZERO KIT, Assembly Manual

Page: 25 / 83

25
28.
29.
30.
31.
32.
33.
- Cover the sheet H10 on the frame by CA Glue. - Fill White glue on the the tri-angle block as pho-
to.
- Attach two the tri-angle block to F1 inside the
fuselage.
- Install the wing paper tube into the fuselage.
- Fitting the hatch into the fuselage, and then use
the Sandpaper Bar to sanding at the area contact
with the fuselage, on forward , also on behind so
that setting up the hatch and the fuselage it togeth-
er.
- Getting prepare two the tri-angle block for rein-
forcing the irewall F1, cut of redundancy so that
the space for blind nut as photo.