11
1st line on display
2nd line on display
(set value)
Signification
20 mA =>
level
1 - 1250 cm
Final value of the sensor at 20 mA
Signal contact 1-4
Possible signals :
- Fault high water
- Collective fault
- Pump 1 on
- Pump 2 on
- Fault pump 1
- Fault pump 2
- system OK
Kind of signal on contacts 1-4
The collective fault signal can be timed
Language
Deutsch
English, etc...
Setting of the menu language
DD.MM.YYYY hh:mm
see adjustments
Date and time
Keylock
on / off
The keylock can be disabled. The key lock is
enabled with the service mode switched-off
only.
WLAN reset
Disabled
Fault protocol
- - -
After having pressed the key
, the
protocol can be paged through by pressing
the keys
.It is not possible to
change the data. The last 32 malfunctions
are saved in chronological order.
3.1.5 Information retrieval
The following table shows the signification of the operational data of the control system :
1st line on display
2nd line on display
(informational value)
Signification
up time
hours: X
(in hours)
Shows the cumulative operating times of the
control system in hours. The value can be
reset to 0 by pressing the keys
.
total pump hours
P1/P2 XXXX/XXXX
(in hours)
Shows the cumulative runtimes of the
pumps in hours. The value can be reset to 0
(separately for both pumps)by pressing the
keys
.
pump starts
P1/P2 XXXX/XXXX
(in number)
Shows the number of pump starts. The
value can be reset to 0 (separately for both
pumps) by pressing the keys
.
next maintenance
within days:XXXX
(in days)
Shows the number of days until the next
maintenance. The information is saved at
intervals of 4 hours. The initial value can be
preset between 365 and 0 days.
