Seypos BD-6580, Configuration Manual

Page: 35 / 140

Enter Setup
** Exit Setup 26
Continuous Mode
This mode enables the engine to scan/capture, decode and transmit over and over again.
When the engine is operating in Continuous Mode, barcode reading can be suspended/resumed through
control over the trigger signal. When barcode reading is in progress, negating the trigger signal after
having maintained it for 30ms or longer will suspend barcode reading; when barcode reading is
suspended, performing the same control over the trigger signal will resume barcode reading.
Continuous Mode
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is
programmable in 1ms increments from 0ms to 3,600,000ms. The default setting is 3,000ms. To learn how
to program this parameter, see Appendix 5 .
Decode Session Timeout
Timeout between Decodes
This parameter sets the timeout between decode sessions. When a decode session ends, next session
will not happen until the timeout between decodes expires. It is programmable in 1ms increments from 0ms
to 65,535ms. The default setting is 1,000ms. To learn how to program this parameter, see Appendix 5 .
Timeout between Decodes