Enter Setup
39 *
* Exit Setup
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot
exceed 10 characters.
Enable Custom Prefix
** Disable Custom Prefix
Set Custom Prefix
To set a custom prefix, scan the
Set Custom Prefix
barcode and the numeric barcodes representing the
hexadecimal values of a desired prefix and then scan the
Save
barcode. Refer to
Appendix 4: ASCII
Table
for hexadecimal values of characters.
Note:
A custom prefix cannot exceed 11 characters.
Set Custom Prefix
Example: Set the custom prefix to
“CODE”
1. Check the hex values of
“CODE” in the ASCII Table. (“CODE”: 43, 4F, 44, 45)
2. Scan the
Enter Setup
barcode.
3. Scan the
Set Custom Prefix
barcode.
4. Scan the numeric
barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5”.
5. Scan the
Save
barcode.
6. Scan the
Exit Setup
barcode.
Summary of Contents for BD-6580
