11
10
1 2
3
OPEN THE HEAD ASS’Y BY PUSHING THE LEVER.
6. Pen folder Paper
FLIP DOWN THE PAPER HOLDER GUIDE.
INSERT THE PAPER INTO THE PAPER ACCESS SLOT AT THE REAR OF THE
PRINTER. SLIDE THE PAPER UNDER THE PAPER SHAFT.
4 5
6 7
1. SLIDE THE PAPER THROUGH THE PAPER
SENSOR.
2. ADJUST THE PAPER GUIDE PROPERLY TO FIT
THE PAPER WIDTH.
CAUTION: IF YOU ADJUST PAPER GUIDE NARROWER
THAN THE PAPER WIDTH, IT MAY CAUSE PRINTING
PROBLEMS.
AFTER ADJUSTING THE PAPER GUIDE, PUT THE
PAPER HOLDER GUIDE UP. PULL THE PAPER TO THE
HEAD ASS’Y AND CLOSE THE HEAD ASS’Y.
(MAKE SURE TO CHECK THE CLOSING SOUND)
2
1
PLACE THE PAPER AT LEAST
THE DOUBLE OF THE PAPER
LENGTH(300MM) DISTANCE AWAY
FROM THE PRINTER.
NOTE
300mm
LOWER THE PRINTER COVER TO THE
DIRECTION OF THE ARROW AS SHOWN IN
THE PICTURE.
CLOSE THE PRINTER COVER TO THE END SLOWLY.
