9
8
1 2
3 4
OPEN THE HEAD ASS’Y BY PUSHING THE LEVER.
PLACE THE ROLL OF PAPER ON THE PAPER
HOLDER.
5. Load Label Paper
FLIP DOWN THE PAPER HOLDER GUIDE.
5 6
2
7 8
LOWER THE PRINTER COVER TO THE DIRECTION
OF THE ARROW AS SHOWN IN THE PICTURE.
CLOSE THE PRINTER COVER TO THE END SLOWLY.
1
1. SLIDE THE PAPER UNDER THE PAPER SHAFT.
1. SLIDE THE PAPER INTO THE PAPER SENSOR.
2. ADJUST THE PAPER GUIDE PROPERLY TO FIT
THE PAPER WIDTH.
CAUTION: IF YOU ADJUST PAPER GUIDE NARROWER
THAN THE PAPER WIDTH, IT MAY CAUSE PRINTING
PROBLEMS
AFTER ADJUSTING THE PAPER GUIDE, FLIP UP
PAPER HOLDER GUIDE.
PULL THE PAPER TO THE HEAD ASS’Y AND
CLOSE THE HEAD ASS’Y.
(MAKE SURE TO CHECK THE CLOSING SOUND)
1
2
