- 7 -
SI 460A DIN SIZE WEIGHING INDICATOR
1. Set the “HOLD” Function
1
st
input : “HOLD”, 2
nd
input : “HOLD Reset”
※ When HOLD is on, “H” mark will be shown at the display.
2. Moving the cursor to right.
3. Under “SETUP” Mode, Enter to “Calibration” Mode.
1. Print out
2. Increase the value
3. F-Function setting : Increase set value
4. Saving weight date under F-function 103-0 or 2.
1. Press this key 4times, within 2secs, enter “SET-UP” mode.
2. F-Function setting : Save the value go to next step
3.Test Mode 1 : Standard serial interface test mode
4. Set-up Mode : Set point setting Mode.
●Setup Mode :It is a mode can SET-UP the calibration, Function of SI 460A .(refer to CH5. SET-
UP)
3-2-4. Hot key (with F key)
Continuous “TARE” setting
(From the second TARE setting, use this key)
If the Printer is installed,
You can print out the “Grand-total data”.
(GRAND-total data can be checked though Print output).
Max accumulated weighing count : 999,999times
Over 999,999times
return to “0” time
Max accumulated weight display : 999999999 (g, kg, ton)
Over 999,999,999 (g, kg, ton)
return to “0” (g, kg, ton)
