45
8 Menu
8.6.7
Table
This menu offers a choice of 3 tables for the sound velocity mea
-
surement. You can choose between two set and one individually
editable table.
Table 1:
Particularly good experience in France
Table 2:
Internationally applicable
Table 3:
Individually editable
Selecting a table
Select the respective row and press the Enter key. If you choose
individual table 3, another window will open which you should
confirm accordingly.
Creating and editing the table
When creating a table for the first time, think about the basis (table
1 or 2) on which your table should be created. The values present
in the preset table are (in the background) copied into individual
table 3 (still blank) where they can be changed. Tables 1 and 2
will remain unchanged.
Select the desired table (table 1 or 2).
In the menu select
Table
–
Individual
–
Edit
.
You can now edit table 3.
Select the material from the list followed by the diameter to be
changed.
Press the Enter key to enter edit mode and set the desired
value.
If you select
Individual
(1 ... 3) under material, a window will
appear in which you can edit the name of the material and the
respective values.
This data will not be overwritten when you update the appliance.
However, as a precautionary measure you are advised to make
a note of the values.
Deleting the table
In the menu select
Table
–
Individual
–
Delete
. After a warn
-
ing prompt (Yes / No) table 3 will be deleted.
You will now have the option of creating a new table 3 based
on table 1 or 2.
