5
2 Starting up
Starting up
2.3
Switching on for correlation
If you switch the device on as follows, you will be in what is known
as correlator mode. Certain functions are only possible in this
mode, others are not available.
Attach the two piezo micro
-
phones to accessible fittings.
When the round magnet is
screwed onto the piezo micro-
phone, remove the very se-
curely attached round magnet
protector if necessary.
Insert the two microphone con-
nection cables into the sockets
of the
RT 06 radio transmitters
(1). If you are only using one
RT 06, you must connect one
microphone directly to the
input (2) of the
AC 06
.
LED 1 on the RT 06 should
light up green.
Connect the headphones to
the input (3) of the
AC 06
.
Switch on the
AC 06
by hold-
ing down the ON key.
The main screen displaying
the software version number
and the battery capacity will
briefly appear.
Next the main screen (see
inside cover). From here you
can go to the menu (menu
key) or perform one of the
functions.
To switch the appliance off
,
hold down the ON key until it
responds.
1
3
2
