SEW-Eurodrive MOVIFIT MC, Manual, Page: 12 / 32

3
Safety-related conditions
Approved devices
Manual – Functional Safety
12
Nameplate of complete unit
The following figure provides an example of a nameplate of the complete MOVIFIT
®
MC device (EBOX and ABOX):
MOVIFIT
Type:
SO#:
MTM11A000-P10A-00
MTA11A-503-S011-M01-00
01.1785033001.0001.12
N2936
ML01
IND. CONT. EQ.2D06
WHEN USED WITH MOVIMOT DRIVES
01
LISTED
®
6872634379
This overall device nameplate is only available if the EBOX and the ABOX have been
ordered as one unit.
INFORMATION
Only components marked with the FS logo for functional safety may be installed in
safety applications. For combinations of devices without FS logo (consisting of indi-
vidual EBOX and ABOX), the safety function must be described in the documenta-
tion.
FS logo description
The FS logo can be displayed on the complete device nameplate of MOVIFIT
®
in the
following design:
01
MOVIFIT
®
MC with STO (without PROFIsafe option)
For MOVIFIT
®
with FS01 logo, refer to this manual.
3.1.2 Device replacement requirements
Observe the following notes during device replacement:
• In safety-related applications, a defective EBOX may only be replaced by an
EBOX according to the type designation on the nameplate of the complete
MOVIFIT
®
device.
• If the ABOX is defective in safety-related applications, you have to replace the en-
tire MOVIFIT
®
device (EBOX and ABOX) with a new MOVIFIT
®
device with
identical type designation.
29157056/EN – 09/2019