8
Service
Device replacement in MOVISUITE®
Operating Instructions – MOVI-C
®
FIELD CONTROLLER standard/advanced
124
Copying a firmware image to the OMH memory card
ü
The steps described in chapter "Exporting a firmware
→
122) have
been performed. The firmware image of the MOVI-C
®
CONTROLLER is located on
your computer as a ZIP archive.
1. Remove the OMH memory card from the
MOVI‑C
®
CONTROLLER.
2. To read the data stored on the OMH memory card, insert the card in a card reader
connected to your computer. You can also use another suitable interface of your
computer.
3. On your computer, use a file explorer to open the contents of the OMH memory
card.
ð
The "licenses" directory on the OMH memory card contains the SEW license
file. To ensure that the licenses you have purchased remain valid, the SEW li-
cense file must again be contained in a "licenses" directory on the OMH
memory card after the firmware update.
28166114571
4. To save your license files, copy the "licenses" directory locally to your computer.
5. Delete all files on the OMH memory card.
6. Unzip the ZIP archive of the required firmware image onto the OMH memory card.
For more information on the export, refer to chapter "Exporting a firmware im-
7. From the "licenses" directory copied locally to your computer, copy the SEW li-
cense file to the "licenses" directory on the OMH memory card.
INFORMATION
Restoring the "licenses" directory after deleting the OMH memory card is also pos-
sible via the MOVISUITE
®
License Manager. For this purpose, carry out the following
steps:
ü
Engineering PC and MOVI-C
®
CONTROLLER are connected.
ü
The engineering PC is connected to the Internet.
• Insert the OMH memory card into the
MOVI‑C
®
CONTROLLER.
• Open the License Manager via the context menu of the MOVI-C
®
CONTROLLER
in MOVISUITE
®
in the "Tools" menu.
• Click on [Transfer licenses to the MOVIC
®
CONTROLLER].
ð
The firmware has been updated. Now you can create a new MOVISUITE
®
project.
26872137/EN – 12/2021