SEW-Eurodrive MFC1/FHX Series Operating Instructions Manual Download Page 27

Page: 27 / 164

Mechanical installation

Installing the device

Operating Instructions – MOVI-C

FIELD CONTROLLER standard/advanced

4.5

Installing the device

4.5.1

Notes

• Only install the device on a level, low-vibration, and torsionally rigid support struc-

ture.

• Check the validity of the degree of protection using the information in the operating

instructions and the data on the nameplate.

• Ensure that cooling air supply is unobstructed and that air discharged by other

units does not influence cooling.

• Use suitable cable glands for the supply leads (use reducing adapters if neces-

sary).

• Seal the cable entries properly.
• Clean the sealing surfaces of the cover before reinstalling it.
• Observe the information of Directive

VDI

2230-1 on determining the tightening

torques for mounting the device to the application.

4.5.2

Electronics cover

WARNING

Risk of burns due to hot surfaces.
Serious injuries.
• Let the devices cool down before touching them.

NOTICE

Loss of the guaranteed degree of protection.
Possible damage to property.
• When the cover is removed from the connection box, you have to protect the

cover and the wiring space from humidity, dust or foreign particles.

• Make sure that the cover is mounted properly.

26872137/EN – 12/2021

Summary of Contents for MFC1/FHX Series





































































































































































Search results

Summary of Contents for MFC1/FHX Series

Reviews:

SEW-Eurodrive MFC1/FHX Series, Operating Instructions Manual, Page: 27 / 164

Search results

Summary of Contents for MFC1/FHX Series

Reviews: