5
Startup
General information
Operating instructions – ECDriveS
®
26
5
Startup
5.1
General information
WARNING
Risk of crushing if the drive starts up unintentionally.
Severe or fatal injuries.
•
Before you start working on the unit, disconnect the motor and all connected op-
tions from the power supply.
•
Secure the motor against unintended power-up.
CAUTION
The surfaces on the drive can be very hot during operation.
Risk of burns.
•
Let the motor cool down sufficiently before you start working on it.
5.2
Setting the DIP switches
24 V
ECC-DBC-24-00
2
1
4
3
6
5
8
7
10
9
0 V
[1]
25852135947
[1]
DIP switch
There is an expandable and transparent protection cover above the DIP switches and
the LED field of the binary control. Open the protection cover from the lower edge of
the binary control to operate the DIP switches. Make sure that the cover is closed pro-
perly after setting the DIP switches.
DIP switch
Function
Button position
OFF
ON
1
Speed selection
See section DIP switches 1 to 5:
Roller speed
2
3
4
5
6
Direction of rotation
CW
CCW
28507088/EN – 11/2018
