4
Installation
Mechanical installation
Operating instructions – ECDriveS
®
17
4
Installation
4.1
Mechanical installation
4.1.1
Mounting the ECR roller drive
CAUTION
Improper fixation of the axis can destroy the motor roller.
Possible damage to property.
•
Make sure not to damage the cable during assembly.
•
Ensure the correct torque for the screw connections.
•
Do not use an impact screwdriver to tighten the screws and nuts.
INFORMATION
The procedure for the mechanical installation depends on the design of the motor
roller.
Design A
•
Cable side: M12×1.25 on 11 mm hexagon
•
Opposite side: M8 female thread
•
Mounting hole position: M12 nut/M8 screw
Proceed as follows:
Start at the cable side:
1. Guide the connector and the cable through the profile hole on the cable side.
2. Insert the axis into the profile hole on the cable side.
Continue with opposite side:
[1]
[2]
19519163019
[1]
M8 screw with spur-cut teeth
[2]
Axis journal
3. Press axis journal [2] inwards on the opposite side.
4. Secure axis journal [2] through profile hole with a M8 screw with spur-cut teeth [1].
28507088/EN – 11/2018
