background image

Warning! Not suitable for children under 3 years. Sharp functional points, puncture hazard.

To be used under direct supervision of an adult.

For ages 6+

ATTENTION! Non-rechargeable batteries are not to be charged. Rechargeable batteries are only to be 
charged by an adult or by children over 8 years of age. Rechargeable batteries are to be removed 
from the toy before being charged. Different types of batteries or new and used batteries are not to 
be mixed. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed 
from the toy. The supply terminals are not to be short-circuited.

RECYCLING BATTERIES, WASTE ELECTRICAL and ELECTRONIC EQUIPMENT
Dispose of old batteries promptly and properly. Do not burn or bury them. Help the environment, 
dispose of batteries and electrical products responsibly. Batteries must not be disposed of in domestic 
waste as they can contain substances which can be damaging to the environment and health. 
Please contact your local authority for designated collection points or recycling facility.

Always disconnect or remove power supply including batteries when changing needles or threading 
machines.

Never open the main motor case of the machine, the mechanism has been factory adjusted. Always 
check the threading of the Iock stitch before beginning to sew a seam. Improper threading or 
placement of the bobbin in the case could result in damage to the machine.

Do not pull on fabric as you sew. Gently guide only. Pulling could break the needle and result in 
damage to the machine or injury.

Remove batteries when the machine is not in use for long periods, This saves battery life and protects 
the machine. Keep extra batteries on hand so projects will not be interrupted when batteries need to 
be replaced.

Do not operate the sewing machine with wet hands, without shoes, or while standing in water or on a 
wet surface when using the adaptor.

Use only the power adaptor recommended by the manufacturer, any other adaptor may cause injury 
or damage to the machine.

Never use with a damaged power cord or plug. Keep the power cord away from heated surfaces.

Do not trap the power cord or pull around sharp edges this could cause the cord to become 
punctured or damaged and could result in injury.

Do not unplug by pulling or tugging on the cord. Grasp the plug with dry hands to remove the plug 
from the outlet. Always turn the power off at the source when removing the plug.

Do not touch needles before you turn off the power.

Do not sew clothing while it is on your body.

Never leave the sewing machine unattended while plugged in. Turn the sewing machine off, and 
unplug the power cord when not in use.

Transformers used with the toy are to be regularly examined for damage to the cord, plug, enclosure 
and other parts, and that, in the event of such damage, the toy must not be used with this transformer 
until the damage has been repaired.

Summary of Contents for Sewing Station TY6142













Reviews: