04-2018
Assembly
Step 1. Assemble Base
Tool required: 12 mm wrench (M)
Screw the stem of the
CASTERS (F)
into the
base by hand. Install the
LOCKING CASTERS
(E)
on the open end of the
BASE (A)
.
Tighten with
12 MM WRENCH (M)
.
Step 2. Install Neck Frame
Tools required: Allen key (O), 11 mm
wrench (N)
Mount the
NECK FRAME (C)
to the base
assembly. Secure the
SCREWS (J)
with the
ALLEN WRENCH (O)
and tighten the
NUTS
(H)
with the
11 MM WRENCH (N)
.
IMPORTANT
: Make sure the neck frame is
angled toward the OPENING of the base.
Step 3. Assemble Top
Tool required: Allen key (O)
Firmly press the
T-BAR CAPS (G)
into either
end of the
T-BAR (B)
. Install
SCREWS (J)
with
WASHERS (K)
through the T-bar into
the table top using the
ALLEN KEY (O)
.
IMPORTANT
: Make sure the T-bar is angled
AWAY from the curve.