www.amishtables.com
Assembly Instructions for Double Pedstal Style Table
Pieces
Table Top
Pedestal Base and Feet
Extensions (if applicable)
Tools Needed
1/2” Wrench
Blanket
Instructions:
1.) You first need to attach the feet to the
pedestal. Flip the pedestal upside down so
that the bolts on the pedestal are on the floor.
There should be 2 holes for each leg already
drilled on the pedestal. The necessary
hardware to attach the legs to the base are on
the feet. You can bolt the legs on by reaching
inside the hollow base and securing the legs
with the washer and nut.
Once the legs are attached, rotate the pedestal
so the feet are on the ground.
2.) Slide apart the table top so that the
mounting plate is exposed. Place the table top
on top of the pedestal base so the holes on the
table top line up with the bolts on the
pedestals. Once the top is placed on the
pedestal secure it with the washer and nut.
The necessary hardware is attached to the
pedestal base. Make sure you don’t over
tighten the nuts – they only need to be snug.
