background image

Tenera Installation Instructions 

Thank you for choosing Tenera Sheer Shadings. With proper installation and care, your new shades 

will provide many years of beauty and performance.

Mounting Surface

Fastener

Wood

Drywall, Plaster

Metal

#6 Hex Head

Provided

Wall Anchors

Not Provided

Sheet Metal 

Not Provided

Tools Needed

Power Drill, 1/4” Driver and drill bits

Tape Measure

Flat blade Screwdriver

Phillips Screwdriver

Pencil

Level

 

Shade Width

12” -   36”

36 1/16” -   79”

79 1/16” -   96”

96 1/16” - 108”

 

Brackets Required

2

3

4

5

INSTALL THE BRACKETS

  Inside Mount 

  - Measure 2” from each jamb for bracket location. If more than two 

    brackets came with your order, space additional brackets evenly 

    between the two and mark their location. Allow a minimum of 18” 

    between the brackets at the motor end for the battery wand (Auto-Lift). 
  - Determine whether or not to remove any tabs from the installation 

    brackets. If using a back cover, use pliers to 

remove both

 tabs from 

    the brackets. If using battery wand 

without

 back cover, leave both

    tabs on brackets. 

    If using a satellite battery pack or DC power supply without a back 

    cover, remove the 

top

 tab (Auto-Lift). 

 

 

  - Mount brackets using the screws provided. Be sure the front edges of 

    the brackets are aligned and level to each other. Shim the brackets if 

    necessary.  

Important:

 Do not overtighten the screws. 

Installation Bracket

Removable Tabs

Shadings with Battery Wand

Motor

Side

Jamb

Jamb

Top limits should be equal 

distance from the ends of headrail.

18" Minimum for Battery Wand

Shadings with Optional Satellite Battery Pack or DC Power Supply

Motor

Side

Jamb

Jamb

2"

Space Evenly

Space Evenly

2"

2"

Space Evenly

Space Evenly

2"

Top View

Installation

Bracket

Back 

Cover

Bracket

Remove tab if using a satellite 

battery pack or DC power supply.

Top limits should be equal 

distance from the ends of headrail.

Space Evenly

Space Evenly

2" – 3"

2" – 3"

Jamb

Jamb

Space Evenly

2" – 3"

2" – 3"

Jamb

Jamb

Top Limits

Space Evenly

 Panel Split

Space Evenly

2" – 3"

2" – 3"

2-On-1 Headrail (Continuum and Sure-Lift Only) 

Standard Shade

Auto-Lift Shade

Installation Instructions

Tenera Sheer Shadings

Auto-Lift, Continuum, Sure-Lift, Cordless, System II, 

EZ Charge, and Auto-Wand

(Continuum shown)

Reviews: