- 29 -
Radio Function
Radio Function Operation
Press the FM / AM button on the remo te control or the SOURCE button on the front
panel to enter FM or AM radio mode. Then press the SEEK+/ - button on the remote
control or the
/
buttons on the front panel for about 1.5 seconds to start searching
forward/backward from the current frequency. Press the SEEK+/- or
/
buttons
again to stop searching. Radio frequency will be displayed on the display panel. The
frequency range of FM is from 87.5MHz to 108MHz, frequency range of AM is from
531 KHz to 1602 KHz.
Fine Tuning
Press the SEEK+/- button on the remote control or the
/
buttons on the front panel
once to fine tune the frequency forward/backward under radio mode.
Semi-memorizing radio stations
If you like a radio station and want to store it for later listening press the SET button to
memo rize it. “SAVE X X” will be displayed on the display panel; “X X” represents the
default station number.
There are two methods to organize the memorized stations:
Use the
,
buttons to adjust the channel number for your preference, and
then press the SET button again; the station will be memorized with the coded
station number.
Press the SET button again, the station will be automatically memorized with the
default station number in sequence.
You can store radio stations from 0 to 19, total 20FM or 20AM radio stations. If no
buttons are pressed within 3 seconds of pressing the SET button first time, the
frequency will appear on the display panel again, and the station will not be stored.
Accessing memorized radio stations
First use the number buttons on t he remote control to input, then press the OK
button for confirmation to go to the selected radio station directly; Or without
pressing any button and wait a moment, it also goes to the selected radio station.
Press the
,
buttons on the remote control or front panel to select the radio
stations forward and backward.
When selecting the stations, the “CH XX” will appear on the display panel, where the
“XX” is the channel number of the stored radio station. After a few seconds, the “CH
XX” disappears and the radio frequency will be displayed once again.
