13
MUTE TIMEOUT
Sets the time delay (sec) between when the buzzer mute
button is pressed and when it will re-sound if the pressure
is still out of range
BUZZER ENABLE
Enables the local audible buzzer. The fixed volume is
approximately 85 dBA as measured at 4-inch distance
OUTPUT MODE
Sets the analog output mode, 4-20 ma, 0-5 VDC or 0-10
VDC
PRESSURE MODE
Sets the unit into unidirectional or bi-directional pressure
modes, ex: +/-0.25” or 0-0.25”WC
DOOR SWITCHING
Only Available on SRIM2. Door switch enable/disable.
Enable if used with a door switch to detect if door is open.
FILTER SETTING
(1-99), default is 10. Sets up a data averaging filter, the
lowest numbers provide the fastest output response but
highest analog output noise. In an extremely pressure
noisy environment use higher numbers until the pressure
display flickering is reduced.
ALARM ENABLE
Enables the audible and visual alarms indicators
