13
ENGLISH
Electric connection
Connect the mains plug of the connecting cable to your mains connection socket.
The LED spotlight is ready for operation once it has been connected to the mains power supply.
2. Hanging installation
The luminaire can also be operated hanging. This is only permitted in connection with the optional accessory
(item no.
1410926021)
. For this, the ring nut (A) is to be used as a fastening.
ATTENTION!
Make sure your suspension point can support the weight of the luminaire.
Alignment of the modules
The luminaire has four individual light modules that can be
mechanically adjusted to the requirements of the place of
use. For this purpose, the modules can be adjusted in several
stages after unlocking to the desired position between 0°
and approx. 90° inclination.
1. Unlocking the modules
Before you can adjust the inclination of the luminaire,
the magnetically locked modules must be unlocked.
To do this, grasp the sides of each individual light
module with both hands and pull it towards your
body (see Figure 1 and 2).
2. Adjust the inclination of the luminaire
In order to bring the luminaire into the desired inclination,
pull the lower locking bolt and move the base plate (E) upwards until the modules reach the desired inclination. To fix
the set position, the locking bolt must engage in the specified bores.
WARNING! Risk of injury!
The snap-in bolt of the quick-release fastener
must
engage in the intended position. This is how you avoid accidents
and injuries.
3. Fold up the luminaire
The luminaire can be returned to its original position by reversing the steps previously described.
Fig. 1 (Transport mode)
Fig. 2