24
SET Energietechnik Ltd. * August-Blessing-Str. 5 * D-71282 Hemmingen * Tel.: +49 (0)7150 9454-0 Fax: +49 (0)7150 2337
9. Shutdown
9.1 Shutdown advice
If the device should be taken out of service for an extended period of time, the system must
be disconnected from the mains at the customer's main switch or via the appropriate fuses.
If there is a danger of frost, water-bearing parts must be emptied or safeguarded
against freezing.
9.2 Shutdown
When shutting down, the system is switched off at the main switch and the water side
connection fittings on the Titan heat exchanger are opened. The heat exchanger is emptied
on the water side, then the caps of the screw fittings are loosely tightened.
Now the system can be disconnected from the network via the fuse.
Before a longer shutdown, we recommend that maintenance is carried out, during
which the system must be thoroughly cleaned and the corrosion protection
renewed.
If necessary, water-carrying parts of the system must be safeguarded against freezing or
drained.
Frost damage is excluded from any warranty.