SES SAT DBPX Page 33 User/Installer Manual Download

Page: 33 / 36

In the event of equipment malfunction, all repairs should be performed by our Company or an
authorized agent. It is the responsibility of users requiring service to report the need for
service to our Company or to one of our authorized agents. Service can be obtained at:

______________________________________________________________

Phone:________________________________________________________

Warning:

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE:

This Equipment has been tested and found to comply with the limits for a Class A

digital device. This is pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy. If not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference. If this
is the case, the user will be required to correct the interference at his own expense.

Summary of Contents for SAT DBPX





































Search results

Summary of Contents for SAT DBPX

Reviews:

Related manuals for SAT DBPX

Brands by name

Popular brands

SES SAT DBPX, User/Installer Manual

Search results

Summary of Contents for SAT DBPX

Reviews:

Related manuals for SAT DBPX

Brands by name

Popular brands