SES SAT DBPX, User/Installer Manual

Page: 17 / 36

SAT DBRX V1.0
SELECT ENGINEERED SYSTEMS 06/93 13
NOTE L2 =
1-6 CHAR. <CR>
SAT ID = XXXX
<*> TO CONTINUE
NO MATCH
* TO CONTINUE
SATS USED XXXX
4.1.1.8
NOTE LINE 2
The next selection in this sub-menu is Note Line 2. This
is also a 24 character field. This field is a continuation of Notes,
for additional data that could not be covered in 24 characters
from Line 1. When Note line 2 data is completely entered, press
the " " key to enter the second note line into memory.
4.1.2 FIND LOCATION
To select the find location function, press "2" from the SAT
Information menu. You will be prompted for 1 - 6 characters.
Select characters in the same manner that names are
programmed into memory (See the diagram on Pg. 11). When
all desired characters are entered, press "#", then "
"
This message will display whatever SAT ID number
matches the letters selected. If there is more than one location
with similar letters, pressing the " " key will display additional
locations that meet the selection criteria.
If no match is made, you will be prompted to press either
the " " (like a <CR>) or the "0" and "#" simultaneously (like an
ESC). A <CR> or " " will return to sub-menu 1 (See section
4.1.1 ADD/EDIT SAT INFORMATION). A <ESC> or "
" and "0"
pressed simultaneously will return the SAT DBRX to normal
operation.
4.1.3 SATS USED
To find the number of SATs used, press "3" from the SAT
INFORMATION menu. The number of SATs currently
programmed into the system will display as shown at right.