SES SAT DBPX, User/Installer Manual

Page: 31 / 36

SAT DBRX V1.0
SELECT ENGINEERED SYSTEMS 06/93 27
CALLING XXXX
INVALID CODE DIALED
*PHONE LINE TROUBLE*
If the ID code selected is not in the data base, the SAT
DBRX will display the error shown at right. Hang up the handset
on the cradle and try again with the correct SAT ID.
7.4 FORCING A SAT ID TRANSMIT
A SAT may be forced to transmit it's ID number (whether the call was placed or received), by
pressing the " " on the keypad that is located on the front panel. While the SAT transmits it's ID, the
microphone is disabled. If the SAT does not transmit an ID then the microphone is disabled for 5
seconds. If the call was placed from the SAT DBRX, any ID tones transmitted by the SAT are
ignored unless, or until a forced transmit is initiated.
7.5
PHONE LINE TROUBLE
In the event of phone line trouble, the message at right will
display and will be transmitted to the printer and the buffer.
Possible causes could be:
1) Phone line unplugged.
2) Incoming phone line dead.
3) Another instrument on the same line in use.
4) Phone wiring shorted.
The SAT DBRX will print the phone line trouble message to the printer (and the buffer) every
minute until the problem is corrected. It will also send an error tone to the handset speaker.