31
CHAPTER 6: Installation
6.2.2.B Attaching a Switch with a Single Composite User-Port Connector
If you’re attaching a switch with DB25 user ports to a Switching Remote Unit’s
CPU port
, run a ServSwitch to ServSwitch Expansion Cable (EHN284) from the
Remote Unit’s CPU port to the switch’s user port.
Figure 6-5. Attaching a KVM switch with a single DB25 user-port connector
to the Switching Remote Unit’s CPU port.
In all other situations
, first plug the included extension cabling into the Extender
Unit. Then plug a User Cable designed for the switch (see
Sections 4.2.2.B
and
4.2.2.C
for product codes) into one of the switch’s user ports. Connect the
matching ends of the extension cabling and User Cable together as shown in
Figure 6-6 below and Figures 6-7 and 6-8 on the next page.
Figure 6-6. Attaching a KVM switch with a single DB25 user-port connector
to the Local Unit’s CPU port (Single-Access model shown).
Local Unit
Switching
Remote Unit
ServSwitch
User Cable
(EHN054B)
ServSwitch to
ServSwitch
Expansion
Cable
(EHN284)
Regular ServSwitch (KV3108SA-R4)
Regular ServSwitch (KV3108SA-R4)
KVM-
extension
cabling,
included
with all
models
