Servomex 02500003E, Quick Start Manual

Page: 20 / 33

Servomex 2500 Quick Start Manual
20 2500 Series - Configuration and Operation 02500/003E/0
3.8 MODBUS ASCII
This section details the analyser configuration that is displayed when the
communications mode is set to MODBUS ASCII. This should be adjusted as necessary
to match the requirements of the Modbus network to which the analyser is connected.
Go via
MENU
/COMMS to SET COMMS PARMS - Press ENTER
At display
screen
Operation
MODBUS ADDRESS =
247
Select required value from 1 to 247 and press ‘ENTER’
SELECT STOP 1 / 1.5 /
2
Select required value and press ‘ENTER’
SELECT DATA BITS 8 /
7
Select required value and press ‘ENTER’
SELECT PARITY EVEN
/ ODD / NONE
Select required value and press ‘ENTER’
SELECT BAUD RATE
9K6 / 4K8 / 2K4 / 19K2
Select required value and press ‘ENTER’
3.9 MODBUS RTU
This section details the analyser configuration that is displayed when the
communications mode is set to MODBUS RTU. This should be adjusted as necessary
to match the requirements of the Modbus network to which the analyser is connected.
3.10 ETHERNET
This section details the analyser configuration that is displayed when the
communications mode is set to ETHERNET. This should be adjusted as necessary to
match the requirements of the network to which the analyser is connected.
Go via MENU/COMMS to SET COMMS PARMS - Press ENTER
At display screen Operation
IP ADDRESS =
000.000.000.000
Select required value and press ‘ENTER’
SUBNET MASK =
000.000.000.000
Select required value and press ‘ENTER’
GATEWAY ADDRESS =
000.000.000.000
Select required value and press ‘ENTER’
Note that the SUBNET MASK value is automatically set to the appropriate default
value whenever an IP address is entered that falls into a different class. This may be
altered as required.