SerVision
MVG400 Installation Guide
Appendix 1: Removing the Unit’s Hard Drive
37
Figure 38: Hard-drive plaform in open compartment
4. Pull the hard-drive platform out of the unit.
Figure 39: Hard drive on platform
To insert a hard drive into the unit:
1. Slide the hard-drive platform into the hard-drive compartment.
2. Tighten the screws that secure the platform in the compartment (see figure 38).
3. Place the compartment cover over the compartment, and secure it in place by locking the lock (see figure 37).
Hard drive
Platform
Screw
Platform – pull to remove hard drive
Screw
